Click an instrument's name for image and details.

| Make | Model | Applications |
|---|---|---|
| NanoTemper | Monolith NT.115 Blue/Red | Quantitation of biomolecular interaction strength |
The MST platform is designed to quickly and easily quantitate interaction strength between biomolecules, be they proteins, small peptides, cofactors, or ions. This powerful technique requires exceedingly small quantities of sample (approximately 60 μL total) in concentration ranges that are typical of bioanalysis. There is no immobilization chemistry required to complete a study, and sample preparation via fluorophore labeling is straightforward. Interactions may be investigated by MST in a wide array of buffers ranging from standard physiological conditions to complex formulations with high detergent content and even in cell lysate, thus obviating the need for tedious purification as required by other methods.

| Make | Model | Applications |
|---|---|---|
| PerkinElmer | LS50B | Structure, folding, binding thermodynamics and kinetics |
The Perkin-Elmer LS50B Luminescence Spectrometer is a complete workstation for a very wide variety of sensitive biochemical studies, including fluorescence, phosphorescence, and bio-chemiluminescence. Featuring excitation and emission monochromators as well as excitation/emission polarizers suitable for fluorescence polarization, anisotropy, and ratio measurements, this instrument is routinely used for obtaining information regarding kinetics in competitive ligand binding assays on a millisecond timescale. A circulating NESLAB water bath to control sample temperature in the stirred cuvette holder is also available, as well as a scanning well plate reader. The spectrometer is equipped with FL WinLab software for completely automated instrument control, providing a platform which offers seamless data collection and analysis.

| Make | Model | Applications |
|---|---|---|
| Beckman Coulter | Optima Max-XP | Small volume ultracentrifugation. Zonal and continuous flow separation methods. |
The Optima™ MAX-XP tabletop ultracentrifuge is a power-packed solution that delivers fast, efficient separations from samples as small as 175 μL up to 32.4 ml and at speeds of up to 150,000 RPM and more than 1,000,000 x g. The Beckman Coulter Optima Max-XP provides a temperature range from 0° - 40° C in increments of 1° C. Rotors available in the facility 1- TLA-100, 2- TLA-110, 3- MLA-80.
Links: Beckman Website | Rotors Beckman Website | Rotor TLA-100 | Rotor TLA-110 | Rotor MLA-80 |

| Make | Model | Applications |
|---|---|---|
| TA Instruments | nanoITC | Thermodynamics of binding |
Essentially all studies of biomolecular interactions involve measurements of dissociation constants or free energies of association (∆G = RT ln Kd). However, a detailed understanding of the physicochemical basis of the interactions often requires more detailed measurements of the thermodynamic components of the free energy change (the enthalpy change, ∆H, and the entropy change, ∆S) and the dependence of these parameters on perturbing conditions such as temperature (i.e. the heat capacity change ∆Cp). Isothermal titration calorimetry has emerged as a convenient and reliable method for obtaining these parameters in a model-independent way. In a single titration, the method gives ∆G, ∆H, and the stoichiometry allowing ∆S to be readily calculated. Repeated titrations at several temperatures give a robust measurement of ∆Cp (∆Cp = d(∆H)/dT, if ∆Cp is independent of temperature) and possibly also the temperature dependence of ∆Cp (if the data are sufficiently sensitive). The Facility currently houses a newly acquired nanoITC instrument with an experimental operating range of 2° - 80° C and a low-volume sample cell interfaced with Origin software for data analysis in a convenient automated package.

| Make | Model | Applications |
|---|---|---|
| GE Life Sciences | Typhoon 9210 | Quantitation of gels, plates, autoradiograms, etc. |
A wide variety of biochemical experiments require the quantitative imaging of material (e.g. gels, plates, etc.) using phosphorescence, chemiluminescence, or fluorescence. The Facility contains a state-of-the-art Amersham Biosciences Typhoon 9210 instrument complete with ImageQuant TL software for analysis and quantitation of various samples ranging from proteins to DNA. This versatile system accommodates sandwich, agarose, and polyacrylamide gels, membranes, microplates, and microarrays. The high quality excitation lasers (Red HeNe @ 633 nm or Green Nd:YAG @ 532 nm) and collection optics allow for the sensitive detection of low abundance targets in artifact-free images. A wide choice of emission filters enable imaging of an extensive variety of fluorophores. Other features include: Automated four-color fluorescence scanning to allow multiplexing of multiple targets in the same sample, ensuring accuracy of analysis, increasing throughput, and saving time. Storage phosphor technology delivers high-resolution imaging and accurate quantitation of 3H, 14C, 32P, 33P, 35S, 125I, and other sources of ionizing radiation. Highly sensitive optics enable direct chemiluminescent imaging without intermediate exposures to films or screens.

| Make | Model | Applications |
|---|---|---|
| GE Life Sciences | Typhoon 9500 | Quantitation of gels, plates, autoradiograms, etc. |
Typhoon FLA 9500 is a variable mode laser scanner with modular access to filters and optical components, providing both versatile and flexible imaging for quantitation of biomolecules. Main features of the scanner are: 1-Versatility: imaging of multifluorescent-, chemifluorescent-, radioisotope-labeled, and colorimetric samples. 2- High resolution and quantitation: a pixel resolution of up to 10 µm and a linear signal response over five orders of magnitude provides quantitation in gels, blots, tissue sections, and arrays 3-High sample throughput: scanning area of 40 × 46 cm enables simultaneous imaging of several gels or blots. 4-Flexibility: optimized performance for new applications by adapting the system with stages, detectors, filters and lasers 5-2-D DIGE imaging: simultaneously image two 2-D DIGE gels for differential expression studies. 6-Excitation Lasers 473 nm, 532 nm and 635 nm. 7-Filters IP, LBP/Y510, LPG/O575, LPR/R665. Additional filters are available in the facility upon user request BPB1/530DF20, BPB1/570DF20.

| Make | Model | Applications |
|---|---|---|
| Jasco | J-715 | Structure and interactions. |
As linearly polarized light passes through an optically active substance, its two circularly polarized components travel at different speeds and are absorbed in differing degrees. CD is a standard method for measuring conformational changes in chiral molecules. Biochemistry researchers using the Facility are active in employing this technique for study of proteins and nucleic acids. CD spectroscopy provides information relating to the conformational arrangement molecules or assemblies and for characterizing such events as cold denaturation of RNA when coupled to thermal control of the sample. The Facility has a Jasco J-715 Circular Dichroism Spectropolarimeter interfaced with thermal sample control and SpectraManager software for instrument control and analysis.

| Make | Model | Applications |
|---|---|---|
| Varian | Cary 100 Bio | Thermodynamics of folding and kinetic assays, oligonucleotide melting |
The Facility maintains a Varian Cary 100 Bio UV / Visible Spectrometer for standard data collection on biological samples. The dual-beam Czerny-Turner instrument has a wavelength range of 190 – 900 nm with a spectral bandwidth of 0.2 nm. It features a working range past 3.5 absorbance units, so dilution of samples to bring them into the instrument range is not necessary. This instrument is also equipped with a temperature controlled 6 x 6 multicell holder complete with built in stirring capabilities, allowing precise thermal control from -10° to 100° C.

| Make | Model | Applications |
|---|---|---|
| Malvern | Zetasizer Nano-S | Particle size distributions, diffusion coefficients, and molecular weight information |
The Malvern Instruments Zetasizer Nano-S dynamic light scattering instrument provides unequaled sensitivity and versatility in the determination of molecular weight and particle size distributions. The unique NIBS (Non-Invasive Back Scatter) technology employed allows routine measurements of particles ranging from 0.6 nm to 6 microns and molecular weight determinations from 1000 to 2 x 107 Daltons, all with sample volumes as low as 12 microliters. The comprehensive analysis software calculates particle size distributions based on scattering intensity, volume, and number density as well as polydispersity. The instrument may be used to characterize sample purity, aggregations, large conformational changes, and screening for crystallization.

| Make | Model | Applications |
|---|---|---|
| BIACORE | 3000 | Kinetics of binding, binding hierarchies, concentration studies |
BIACORE permits detailed investigation of bimolecular binding without the use of conventional labels. A range of molecules from lipid vesicles, viruses, bacteria, and eukaryotic cells may be studied. The instrument provides extremely high sensitivity as well as precisely controlled experimental conditions. By immobilizing a molecule onto the sensor surface, binding events may be followed by surface plasmon resonance. As many as four separate measurements may be obtained from one chip, and automated fitting algorithms yield kinetic constants. Equipped with an autosampler, the BIACORE 3000 accommodates long, unattended runs over many hours. Sample injections may be as little as five microliters to monitor binding in all four flowcells. A broad range of sensor chip surfaces enables selection of optimal conditions for a variety of applications.

| Make | Model | Applications |
|---|---|---|
| PerkinElmer | Tri-CArb 4810 TR | Quantitation of assays and substrates |
The PerkinElmer Tri-Carb 4810 TR Liquid Scintillation Counter is a computer based, multiuser unit that provides CPM/direct DPM quantitative detection of beta radiation, other types of radiation, and various types of luminescence. The instrument is capable of handling up to 720 sample vials, using 15 pre-defined protocols for detecting 3H, 14C, 32P, and 125I in single label counting.

| Make | Model | Applications |
|---|---|---|
| KinTek | SF-300X | Fast reaction kinetics |
The SF-300X allows for swift mixing of small volumes (30 microliters) of reactants followed by rapid observation of absorbance, fluorescence, anisotropy, or light scattering to investigate fast reaction kinetics. Equipped with a CCD array accessory, the SF-300X permits observation of multiple wavelengths simultaneously for especially complicated systems. Data analysis software includes KinTek Global Kinetic Explorer which accommodates a powerful combination of features including construction of a wide variety of kinetic models and global fitting of experimental data.

| Make | Model | Applications |
|---|---|---|
| Wyatt Technology | DAWN HELEOS II (MALS) / OptiLab rEX | Absolute molecular weight, size and conformation of macromolecules in solution |
A combination multi-angle light scattering instrument and refractive index detector are combined in line with size exclusion chromatography (SEC) to enable quick determination of parameters such as absolute molecular weight, size, and conformation of macromolecules in solution. In conjunction with ultracentrifugation and DLS, the SEC-MALS arrangement provides complimentary confirmation of biomolecule structure in solution, even extending the range of measurements to apply directly to MegaDalton molecular weight virus capsids which is inaccessible by other direct methods.

| Make | Model | Applications |
|---|---|---|
| Applied Biosystems | StepOne Plus RT-PCR | Quantitation of gene expression, assay validation |
Real-time polymerase chain reaction (RT-PCR) is one of the most powerful and sensitive gene analysis techniques available to bioscientists. The amplification of DNA primers is automated and followed via choice of two different fluorescent probe molecules as it occurs. This enables very sensitive detection of DNA replicates and also provides melting point analysis to confirm presence of desired amplicons. The instrument is used primarily for quantitation of gene expression as well as for quality control and assay validation.

| Make | Model | Applications |
|---|---|---|
| Beckman | XPN | Pelleting of samples, zonal and continuous flow separation methods. |
These floor model preparative ultracentrifuges are capable of spinning up to 40 different rotors to speeds of 100,000 rpm (802,000 x g) for pelleting of samples. Also possible are zonal and continuous flow separation methods with precise speed and temperature control. Beckman swinging bucket rotors (SW41, SW32) or fixed angle rotors (70Ti, and 100Ti) are available for sample preparations.

| Make | Model | Applications |
|---|---|---|
| Thermo Scientific | Nanodrop 1000 | Measurement of DNA, RNA and protein concentration. |
The NanoDrop 1000 UV-Vis Spectrophotometer allows the detection of DNA, RNA and proteins featuring a unique microvolume pedestal. Only 1-2 uL and few seconds are needed to do a measurement. The following applications are supported by NanoDrop 1000. 1- Concentration and Purity of nucleic acids (DNA and RNA). 2- General UV-Vis measurements. 3- Concentration and purity of purified proteins. 4- Protein concentration using BSA method. 5- Protein concentration using Bradford method. 6- Protein concentration using Lowry method.

| Make | Model | Applications |
|---|---|---|
| Microfluidics | Microfluidizer | Cell disruption. |
The microfluidizer is located at Jordan Hall 047 and is used for cell disruption as well as liposomes and emulsion preparations. Air consumption is needed during operation, so that four air cylinder are installed and should be replaced upon exhausting the existent ones. The microfluidizer operates at pressures up to 30,000 psi (2068 bar) and requires a minimum sample size of 15 ml.

| Make | Model | Applications |
|---|---|---|
| SPEX | Freezer/MIll 6875A | The Freezer/Mill is a cryogenic grinder to process samples in liquid nitrogen. |
The 6875 Freezer/Mill is a large cryogenic mill that can grind up to 100 grams of samples, specially recommended to grind tough and/or temperature sensitive samples. The mill requires liquid nitrogen which cools down samples to cryogenic temperatures, then pulverizes them by using a magnetic steel impactor back and forth against two stationary end-plugs. The sample is maintained in a close vial, so that hazardous or critical samples are easily controlled. Specifications: 1- Liquid nitrogen required for operation. Equipped with liquid nitrogen level sensor, insulated case and lid safety interlock switch for operator protection. 2- Grinding Vial Sets of polycarbonate offered by the facility. Grinds samples in the 0.1 - 20 gram range. 3- Auto-Fill System provided for automated filling with liquid nitrogen.

| Make | Model | Applications |
|---|---|---|
| Avestin | EmulsiFlex-C3 | Cell disruption and sample homogenization. |
The Emulsifier EmulsiFlex-C3 is an excellent choice for a variety of applications, such as: Emulsions, Dispersions, Liposomes, Cell Disruption and Fine Particle Deagglomeration. Very limited air consumption is needed during operation. The air-pressure to drive the machine is generated by an internal compressor, although some air is needed to cleaning and sample pressurization purposes. The Emulsifier operates at pressures up to 30,000 psi (2068 bar) and requires a minimum sample size of 10 ml.

| Make | Model | Applications |
|---|---|---|
| Particle Metrix | Zetaview | Measurement of sizes and concentrations of nanoparticles in solution. |
ZetaView is an individual particle tracking analyzer where classical micro-electrophoresis and Brownian motion are presented as modern analysis tools. The instrument can auto-align and auto-focus thousands of particles, track their Brownian motions and make size distributions using the Stokes-Einstein's Law as theoretical background. In addition, particle concentrations can be determined by video frame assessment counting.

| Make | Model | Applications |
|---|---|---|
| MJ Research | Tetrad MTC-225 | Thermocycler to perform Polymerase Chain Reactions using temperature gradients and up to 4 different programs. |
The Tetrad MTC-225 is a thermocycler to perform PCRs using temperature gradients and different programs.

| Make | Model | Applications |
|---|---|---|
| ForteBio | Octet K2 | Bio-Layer Interferometry (BLI) to measure binding interactions of small molecules, proteins, antibodies, and even cells. |
The Octet K2 system monitors binding events in real time to calculate on rates (ka), off rates (kd), and equilibrium constants (KD).

| Make | Model | Applications |
|---|---|---|
| Biotek | Synergy H1 | Top and bottom fluorescence intensity, UV-visible absorbance and luminescence detection are available to meet many life science research requirements. |
The microplate reader Synergy H1 is a configurable multi-mode microplate reader with monochromator-based optics for flexibility. It offers high-performance and applications versatility with top and bottom fluorescence intensity, UV-visible absorbance and luminescence detection
